Midrand SA South Africa
Lets trust Sun rather than Eskom Special price 19 Nov 2024
|
Conversion of electric
Geysers to Solar.
Solar Hot water Circulating pump to work Automatically with Solar panels Solar Hot Water Circulating Pump
The
Highly efficient TS5 can be connected
directly to a photovoltaic
panel and is characterized by its
small size,
high efficiency,
and extreme low power consumption. The long life brushless motor technology provides a maintenance free quiet service life. This pump is perfect for Smaller family home thermal solar systems or any circulation pump application where conventiona l power is not available.You do not need battery or Voltage controller. Direction: On Google Map you can search for ICM Industries and drive here.
e-mail: icm@lantic.net |
 15 Watt solar panel R195 Excluding VAT |
 To avoid air trap pump can be install any other way but not this way. 10 Watts for normal geysers R745 Excl VAT Part: 10PV 10% discount for quantity 3 or more. No warrantee if your system pressure is over 400 KPA Also needs one way valve in the loop. |
|
Since the pump works in loop water circulate in higher head as well, if you take the air out. Specifications Voltage: 8V~24V DC（Standard:12V DC） Max Flow Rate: 8.5 L/Min Max Water Head for 5 watt pump : 1.4M
Brass 1/2'' BSP/NPT male Inlet/Outlet Max system pressure: 10Bar Max working temperature: 110°C (230° F) Min Start-up power Consumption less than 2 Watt Low Noise: 45db at 1m distance |
The
most professional Solar DC hot water circulating pump for solar hot water system
and powered solar panel directly. |
|
|
Specifically
designed
for
the
following
uses:
Hot Water Circulation Radiant Floor Heating Solar Applications Liquid Transfer General Purpose Pumping |
More features: Durable permanent magnetic rotor/impeller and fine ceramic shaft Advanced magnetic drive technology, without any leakage for ever Long life brushless pump, ideal life for 30000 hours Heavy duty work, can sustain continual 24 hours' work Low noise: ≤45dB far from 1m distance Low or no maintenance Low power consumption Can be customized |
|
|
Special price 19 Nov 2024
Specialized
valve
Fitment
(for
horizontal) If you do not print the Direction to our office you shall have difficulty finding us
|
If
you
do
not
print
the
Direction
to
our
office
you
shall
have
difficulty
finding
us. Life expectancy is a few years but the warrantee is six months. This is a valve specially designed to help in the conversion of standard electrical geysers to solar geysers. Once the geyser has been drained remove the drain cock and fit it to the end of the conversion valve. This conversion valve connects to the cold inlet of the geyser and has a 0.5 m length of copper pipe that sticks into the geyser. Some geysers have a plastic insert in the cold inlet; this insert needs to be removed in order to connect the conversion valve. Some older geysers have a spreader situated about 100mm in from the cold inlet. For these geysers a hole needs to be drilled through the spreader to allow the insertion of the conversion valve.
|
|
